Introducing the new version of Netfabb 2018.3................
Netfabb 2018.3
has been released in the new version.We will introduce the latest version of the new function and the function update content.
There is a local simulation for the Ultimate version.
The mesh is created only in the floor-based. Can perform only one type of powder bed
Microwave components can be adjusted from 1 to 20 and can be adjusted precisely within the range of the number of nodes and the number of layers of nodes.
Although there are some limitations compared to the normal version But if confirming the trend of modeling, it will be effective enough
Microwave components can be adjusted from 1 to 20 and can be adjusted precisely within the range of the number of nodes and the number of layers of nodes.
Although there are some limitations compared to the normal version But if confirming the trend of modeling, it will be effective enough
Access level simulation table function
|
Netfabb Premium
|
Netfabb Ultimate
|
Netfabb local simulation
|
|
• Powershape utility
• Simulation LT (on the cloud only) |
• Powershape utility
• Optimization utility • Advanced Tool Path Utility • Simulation LT (on Cloud, Local part functions) |
• Cloud top, local (all functions)
|
Convert mesh to BREP model
You can convert the mesh format created from the STL to a BREP surface that can be used in CAD.
By converting the captured scan data and the optimized topology pattern to the surface data, the CAD correction will be enabled.
By converting the captured scan data and the optimized topology pattern to the surface data, the CAD correction will be enabled.
Adjusting the angle of operation support
When adjusting the angle of the polyline support and the amount of support Each support must be adjusted individually. But many types of support can be adjusted at the same time
This will unite in what has become a slightly different angle with individual support.
In addition to the mesh and hole drilling, the mesh structure can now be defined as a supported shape, even with normal mesh support.
This will unite in what has become a slightly different angle with individual support.
In addition to the mesh and hole drilling, the mesh structure can now be defined as a supported shape, even with normal mesh support.
Added the function of Lattice Commander (preview version)
For the mesh structure created can increase the slope and shading thickness.
The function to combine the surface mesh structure with the internal mesh structure that is poorly used now has been added.
The function to combine the surface mesh structure with the internal mesh structure that is poorly used now has been added.
Lattice Commander (preview version)
For the mesh structure created can increase the slope and shading thickness.
The function to combine the surface mesh structure with the internal mesh structure that is poorly used now has been added.
The function to combine the surface mesh structure with the internal mesh structure that is poorly used now has been added.
Adaptive remesh
(Standard version)Algorithm for remeshing has been renewed.
Read the shape, distinguish between the parts that need to adjust the mesh and the bad parts. Can reduce the number of mesh while maintaining accuracy
Read the shape, distinguish between the parts that need to adjust the mesh and the bad parts. Can reduce the number of mesh while maintaining accuracy
Additional registration is a workspace that FormLabs Form 2 can use.
Formlabs Form 2 has been newly added.
We can restore the shape, basic functionality, resizing, checking, support, proper angles, support creation, adding Lattice Assistant and punching tools.
We can restore the shape, basic functionality, resizing, checking, support, proper angles, support creation, adding Lattice Assistant and punching tools.